MOULD RELEASE SYSTEM
Wax Based
Product Code
Prolon® 59
Description
Easy to use carnauba based mould release agent. Reduces cycle time, as it does not build up on moulds. Application, buffing and mould preparation is extremely easy. Provides exceptional mould release performance, reproductivity and high-gloss surface.
Product Code
Prolon® 77
Description
Professional mould release paste wax. Formulated using finest ingrediants for use in FRP composite application. Reduces cycle time, as it does not build up on moulds. Application, buffing and mould prepration is extremely easy. Provides multiple release performance, reproductivity, high-gloss and a non-staining surface.
Properties and Composition
Application
Appearance
Carrier
Gloss Level
Working Temp.
Prolon® 59
Paste Wax
Sacrificial
Light Brown
Solvent
High
Ambient
Prolon® 77
Premium Paste Wax
Sacrificial
Pale Yellow
Solvent
Extraordinary
Ambient
Resin Recommendation
Polyester
Vinyl Ester
Epoxy
Phenolic
Prolon® 59
*****
****
**
-
Prolon® 77
*****
****
**
-
Application
Hand Layup
Spray Up
RIM / LRTM
Infusion / Vacuum
Casting
Compression
Prolon® 59
*****
*****
*****
*****
****
****
Prolon® 77
*****
*****
*****
*****
****
****
Packaging
Container Size
Box Pack
Container Box Carton
Prolon® 59
500 gram
10 kg (20 x 1/2 kg)
40 kg (80 x 1/2 kg)
Prolon® 77
500 gram
10 kg (20 x 1/2 kg)
40 kg (80 x 1/2 kg)
Semi Permanent
Product Name
Release Agent
Product Code
L455
Release Agent for epoxies, polyester resins, thermoplastics, adhesives, and elastomeric products.
- Easy to use, optimal drying
- In most cases, a single application provides releases through multiple cycles
- Provides a glossy finish to the surface
- No build-up on moulds and dies
- Provides a parting film stable at temperatures exceeding most moulding processes
- Lowers adhesion energy of the mould
- Highly versatile and can be used on all mould surfaces
- No interference with bonding and post finishes
- Minimizes friction and increases the life of mould
- No CFC
Product Name
Mould Sealer
Product Code
L725
Mould Sealer is a high-performance liquid sealer to seal and condition the mould in fabricating plastic parts, for epoxies, melamines, methacrylates, phenolic, polyesters and polyurethanes.
- Removes porosity present on the mould
- Provides protection to mould and enhances performance of the mould release
- No build – up on moulds and dies
- Provides a heat stable parting film stable at temperatures exceeding most moulding processes
- Highly versatile and can be used on all mould surfaces
- No CFC
Product Name
Mould Cleaner
Product Code
CLR500
Mould Cleaner is a proprietary solvent system to clean moulds. It is a multi-purpose cleaner to remove any traces of wax, release agents, sealers and buffing compounds.
Packaging
Product Code
L455
L725
CLR500
Size
1 ltr 5 ltrs 20 ltrs
1 ltr 5 ltrs 20 ltrs
1 ltr 5 ltrs 20 ltrs